Long-oval brace bracket formed from 40×2 mm press metal for accurate alignment and secure fixing of diagonal bracing on
oval tube rails in greenhouse frames. The elongated fixing hole offers generous adjustment for set-out and tensioning while
keeping a low-profile installation that stays clear of crop aisles.
The 40×2 mm section spreads load over a broad contact area to minimise point stress and protect coated surfaces on the oval tube.
Available in two finishes: Sendzimir galvanised for uniform corrosion protection, or black/untreated steel for projects that
will be painted or powder-coated on site.
Key features
- 40×2 mm press metal: stable bearing with reliable load distribution.
- For oval tube rails: seats square on oval profiles for a secure fit.
- Elongated fixing hole: ample adjustment for precise brace positioning.
- Low profile: neat, snag-free installation in working aisles.
- Two finishes: Sendzimir galvanised or black/untreated for site finishing.
Installation guidance
- Seat on the oval tube; align through the fixing hole and tighten fasteners evenly with suitable washers.
- Set brace angle and tension; re-check after initial load and thermal cycles.
- Protect coatings and edges; avoid grinding or cutting near the connection.
